HT80 Intelligent Turbine Controller-鸿运国际能源

HT80 Intelligent Turbine Controller

HT80 intelligent turbine controller products are mainly used for small and medium-sized steam turbine, micro gas turbine, small and medium-sized water turbine and other rotating equipment control, is the Horbon company engaged in many years of research on rotating mechanical control system research crystallization.

The product is highly integrated with servo control channel, LVDT channel, die-in and out signal and turn-on signal, and supports external expansion IO module, while the speed, power and steam pressure adopt triple redundant scheme to ensure the high and reliable operation of the control system.

HT80 products have speed control, load control, steam pressure control and other control modes, as well as various test functions of rotating machinery, various control modes and test functions can be switched during the operation of the unit operation.

HT80 products adopt an all-metal structure, with good anti-interference performance, can meet the use requirements of harsh working conditions; using fully autonomous controllable hardware and software design, flexible configuration, convenient for field technicians for maintenance.

Functional advantages

System structure diagram

Industry application

Data download

Typical performance

Functional advantages

I/O信号处置惩罚功效

转速信号输入：可自动顺应磁阻式或磁敏式转速探头发出的正弦波或方波信号，信号幅度大于0.5V小于50V即可。频率丈量规模0.5Hz～20KHz，丈量精度±1HZ。支持传感器15V供电。
LVDT信号输入：直接吸收3线制LVDT位置传感器信号，支持断线检测，支持LVDT智能优选，精度±1%。
开关量信号输入：吸收干接点信号输入，盘问电压DC24V。
开关量信号输出：继电器触点信号输出，触点容量：DC30V/1A；有源信号输出，DC24V/50mA，带输出短路�；�。
拟量信号输入：4～20mA输入，精度±0.1%，其中所有通道可提供24V对外供电；8个通道为一组，组间相互电气隔离；
RTD输入：支持PT100和Cu50，精度±0.1%；
模拟量信号输出：4～20mA输出，支持断线检测，精度±0.2%，带负载能力<500欧。
伺服输出：正负伺服电流/电压信号输出，量程可设置为±10mA、±40mA、±80mA、±150mA，±10V，具备比例、积分、偏置和颤振输出功效。
脉冲接口：支持脉冲接口，可以控制步进或伺服电机。支持加减速,S形曲线。
伺服监视：监视伺服输出的电压值。